A
-
Abdollahi, M.
INVESTIGATION OF THE EFFECT OF PULSED CURRENT GAS TUNGSTEN ARC WELDING ON AUSTENITIC AISI 321 STAINLESS STEEL BONDING PROPERTIES [Volume 41, Issue 1, 2022, Pages 59-79]
-
Abdoulvand, E.
INVESTIGATION OF THE EFFECT OF PULSED CURRENT GAS TUNGSTEN ARC WELDING ON AUSTENITIC AISI 321 STAINLESS STEEL BONDING PROPERTIES [Volume 41, Issue 1, 2022, Pages 59-79]
-
Abouei Mehrizi, A.
CRP and TNF-α Detection using Porous Silicon Substrate Based on Reflectometric Interference Fourier Transform Spectroscopy [Volume 41, Issue 3, 2022, Pages 1-12]
-
Ahmadi, T.
Investigating Corrosion Behavior of Hard Coatings of Iron-base Electrodes Containing Carbide Elements [Volume 41, Issue 4, 2023, Pages 37-59]
-
Alipour, M.
The Effect of SiC Nanoparticles’ content on Mechanical Properties and Wear Behavior of A380 Aluminum Alloy Nanocomposite Produced by Powder Metallurgy Method [Volume 41, Issue 4, 2023, Pages 91-102]
-
Asefnejad, A.
EVALUATION OF ANTIBACTERIAL PROPERTIES OF POLYLACTIC ACID-POLYCAPROLACTONE-CONTAINING HYDROXYAPATITE AND ZINC OXIDE NANOPARTICLES IN HARD TISSUE ABSORBABLE SCAFFOLDS [Volume 41, Issue 1, 2022, Pages 1-17]
-
Atashgar, K.
Radar Evasion Control of Military Structures Using Graphene Oxide Coating RGO/NiFe2O4 and Polynomial Profile Monitoring [Volume 41, Issue 4, 2023, Pages 61-74]
-
Azimi-Fouladi, A.
Investigation of Photocatalytic Properties of TiO2 and TiO2-4wt.%CdO Nanoparticles for Degradation of Methylene Blue [Volume 41, Issue 2, 2022, Pages 37-50]
B
-
Basir, P.
Investigating Corrosion Behavior of Hard Coatings of Iron-base Electrodes Containing Carbide Elements [Volume 41, Issue 4, 2023, Pages 37-59]
-
Borhani, G. H.
Synthesis of Al7075/TiB2-Al2O3 In-Situ Hybrid Composite by Stir Casting Method [Volume 41, Issue 2, 2022, Pages 51-65]
D
-
Dabir, F.
The Influence of Peroxides and Washing Process on Metal-Organic Framework of MOF-5 Synthesized by Direct Mixing Method [Volume 41, Issue 2, 2022, Pages 17-36]
-
Daneshnia, A.
Comparison of Superhydrophobicity, Anti-Corrosion, Anti-Icing, and Self-Cleaning Properties of Nickel and Cobalt Coatings Fabricated by one-Step Electrodeposition [Volume 41, Issue 3, 2022, Pages 13-29]
-
Dehghani Firoozabadi, F.
EVALUATION OF ANTIBACTERIAL PROPERTIES OF POLYLACTIC ACID-POLYCAPROLACTONE-CONTAINING HYDROXYAPATITE AND ZINC OXIDE NANOPARTICLES IN HARD TISSUE ABSORBABLE SCAFFOLDS [Volume 41, Issue 1, 2022, Pages 1-17]
-
Dehnavi, M.R.
The Effect of Quenching and Partitioning (Q&P) Process on the Structural and Mechanical Properties of AISI 4130 Steel [Volume 41, Issue 3, 2022, Pages 51-61]
-
Doostmohammadi, A.
CHARACTERIZATION OF CHITOSAN AND POLYETHYLENE GLYCOL BIOPOLYMERS COATINGS ON MAGNETIC SPINEL FeFe2O4 NANOPARTICLES [Volume 41, Issue 1, 2022, Pages 81-95]
E
-
Ebrahimi, M.
Synthesis of YVO4 Ceramic Doped with Europium using Combustion Synthesis Method as a Down-Shifting Material for Solar Cell Applications [Volume 41, Issue 3, 2022, Pages 41-49]
-
Eslami, A. M.
INVESTIGATION OF THE EFFECT OF PULSED CURRENT GAS TUNGSTEN ARC WELDING ON AUSTENITIC AISI 321 STAINLESS STEEL BONDING PROPERTIES [Volume 41, Issue 1, 2022, Pages 59-79]
-
Etemadzadeh, J.
Investigating Corrosion Behavior of Hard Coatings of Iron-base Electrodes Containing Carbide Elements [Volume 41, Issue 4, 2023, Pages 37-59]
F
-
Fallah-Arani, H.
The Influence of Peroxides and Washing Process on Metal-Organic Framework of MOF-5 Synthesized by Direct Mixing Method [Volume 41, Issue 2, 2022, Pages 17-36]
G
-
Ghalambaz, M.
INVESTIGATION OF THE EFFECT OF PULSED CURRENT GAS TUNGSTEN ARC WELDING ON AUSTENITIC AISI 321 STAINLESS STEEL BONDING PROPERTIES [Volume 41, Issue 1, 2022, Pages 59-79]
-
Ghanbari, A.
The Influence of Peroxides and Washing Process on Metal-Organic Framework of MOF-5 Synthesized by Direct Mixing Method [Volume 41, Issue 2, 2022, Pages 17-36]
-
Ghasemi, A.
Investigating the Effect of B, Sb, and Ge Elements on the Structural and Magnetic Properties of Rare Earth Elements -Free Permanent MnBi Magnets [Volume 41, Issue 2, 2022, Pages 111-125]
-
Golnia, Z.
Optimization of the Process Parameters of Antibacterial Bioactive Glass/Polycaprolactone Composite Scaffold Printed by 3D Method [Volume 41, Issue 4, 2023, Pages 1-25]
-
Gordani, Gh.R.
Investigating the Effect of B, Sb, and Ge Elements on the Structural and Magnetic Properties of Rare Earth Elements -Free Permanent MnBi Magnets [Volume 41, Issue 2, 2022, Pages 111-125]
H
-
Harati, F.
EFFECT OF TOOL ROTATION RATE IN FRICTION STIR SPOT WELDING ON LIQUATION CRACKING OF AZ91 ALLOY [Volume 41, Issue 1, 2022, Pages 97-111]
-
Hasanzadeh-Tabrizi, S.A.
Investigation of Photocatalytic Properties of TiO2 and TiO2-4wt.%CdO Nanoparticles for Degradation of Methylene Blue [Volume 41, Issue 2, 2022, Pages 37-50]
-
Hassanzadeh-Tabrizi, S.A.
Spark Plasma Sintering of Alumina- 15 wt.% Ceria Powder Prepared by
Sol-Gel Method [Volume 41, Issue 4, 2023, Pages 27-36]
-
Hossain Reza, S.
The Effect of Quenching and Partitioning (Q&P) Process on the Structural and Mechanical Properties of AISI 4130 Steel [Volume 41, Issue 3, 2022, Pages 51-61]
J
-
Jabbareh, M. A.
EFFECT OF TOOL ROTATION RATE IN FRICTION STIR SPOT WELDING ON LIQUATION CRACKING OF AZ91 ALLOY [Volume 41, Issue 1, 2022, Pages 97-111]
-
Jamali, H.
Investigating the Effect of B, Sb, and Ge Elements on the Structural and Magnetic Properties of Rare Earth Elements -Free Permanent MnBi Magnets [Volume 41, Issue 2, 2022, Pages 111-125]
-
Jamali, H.
Fabrication of Spark Plasma Sintered Spark Plasma Sintered Transparent Alumina Using Magnesium Oxide and Lanthanum Oxide as Sintering-Assisted [Volume 41, Issue 3, 2022, Pages 31-40]
K
-
Kalantar, M.
Optimization of the Process Parameters of Antibacterial Bioactive Glass/Polycaprolactone Composite Scaffold Printed by 3D Method [Volume 41, Issue 4, 2023, Pages 1-25]
-
Kermanpur, A.
Synthesis of YVO4 Ceramic Doped with Europium using Combustion Synthesis Method as a Down-Shifting Material for Solar Cell Applications [Volume 41, Issue 3, 2022, Pages 41-49]
-
Khanzadeh, M.R.
Investigating Corrosion Behavior of Hard Coatings of Iron-base Electrodes Containing Carbide Elements [Volume 41, Issue 4, 2023, Pages 37-59]
L
-
Lari Baghal, S. M.
INVESTIGATION OF THE ADDITION OF METHIONINE ON THE CORROSION OF 316L STAINLESS STEEL FABRICATED BY SLM METHOD IN SULFURIC ACID MEDIA [Volume 41, Issue 1, 2022, Pages 19-35]
-
Loghman, M. R.
FABRICATION AND CHARACTERIZATION OF MICROSTRUCTURE AND MECHANICAL PROPERTIES OF NANOCOMPOSITES BASED ON NICRALY ALLOY REINFORCED WITH SI3N4 PARTICLES BY SPARK PLASMA SINTERING METHOD [Volume 41, Issue 1, 2022, Pages 37-58]
-
Loghman Estarki, M. R.
Investigating the Effect of B, Sb, and Ge Elements on the Structural and Magnetic Properties of Rare Earth Elements -Free Permanent MnBi Magnets [Volume 41, Issue 2, 2022, Pages 111-125]
-
Loghman Estarki, M. R.
Fabrication of Spark Plasma Sintered Spark Plasma Sintered Transparent Alumina Using Magnesium Oxide and Lanthanum Oxide as Sintering-Assisted [Volume 41, Issue 3, 2022, Pages 31-40]
-
Loghman Estraki, M. R.
Synthesis of Mesophase Carbon Microbeads from Soft Bitumen and Coal Tar by Liquid Phase Carbonization Method [Volume 41, Issue 4, 2023, Pages 75-90]
-
Lotfi, B.
Improving the Erosion Behavior of Inconel 625 Substrate by PTA-Deposited Stellite6/B4C Composite Cladding [Volume 41, Issue 2, 2022, Pages 1-15]
M
-
Mansouri, H.
Fabrication of Spark Plasma Sintered Spark Plasma Sintered Transparent Alumina Using Magnesium Oxide and Lanthanum Oxide as Sintering-Assisted [Volume 41, Issue 3, 2022, Pages 31-40]
-
Mansouri, H.
Synthesis of Mesophase Carbon Microbeads from Soft Bitumen and Coal Tar by Liquid Phase Carbonization Method [Volume 41, Issue 4, 2023, Pages 75-90]
-
Masoudi, R.
Radar Evasion Control of Military Structures Using Graphene Oxide Coating RGO/NiFe2O4 and Polynomial Profile Monitoring [Volume 41, Issue 4, 2023, Pages 61-74]
-
Mehdikhani, A.
The Influence of Peroxides and Washing Process on Metal-Organic Framework of MOF-5 Synthesized by Direct Mixing Method [Volume 41, Issue 2, 2022, Pages 17-36]
-
Mirzaei, A.
A Review of Resistive Gas Sensors Based on Semiconducting Metal Oxides [Volume 41, Issue 2, 2022, Pages 67-109]
-
Mohammadi, A.
The Effect of SiC Nanoparticles’ content on Mechanical Properties and Wear Behavior of A380 Aluminum Alloy Nanocomposite Produced by Powder Metallurgy Method [Volume 41, Issue 4, 2023, Pages 91-102]
-
Mohammadi, N.
Improving the Erosion Behavior of Inconel 625 Substrate by PTA-Deposited Stellite6/B4C Composite Cladding [Volume 41, Issue 2, 2022, Pages 1-15]
-
Mohammadi, Sh.
CRP and TNF-α Detection using Porous Silicon Substrate Based on Reflectometric Interference Fourier Transform Spectroscopy [Volume 41, Issue 3, 2022, Pages 1-12]
-
Mohammadsharifi, E.
FABRICATION AND CHARACTERIZATION OF MICROSTRUCTURE AND MECHANICAL PROPERTIES OF NANOCOMPOSITES BASED ON NICRALY ALLOY REINFORCED WITH SI3N4 PARTICLES BY SPARK PLASMA SINTERING METHOD [Volume 41, Issue 1, 2022, Pages 37-58]
-
Mohammad Sharifi, E.
Synthesis of Al7075/TiB2-Al2O3 In-Situ Hybrid Composite by Stir Casting Method [Volume 41, Issue 2, 2022, Pages 51-65]
-
Mohammad Sharifi, E.
Synthesis of Mesophase Carbon Microbeads from Soft Bitumen and Coal Tar by Liquid Phase Carbonization Method [Volume 41, Issue 4, 2023, Pages 75-90]
-
Mousavizadeh, S. M.
EFFECT OF TOOL ROTATION RATE IN FRICTION STIR SPOT WELDING ON LIQUATION CRACKING OF AZ91 ALLOY [Volume 41, Issue 1, 2022, Pages 97-111]
N
-
Naderi, M.
Synthesis of Mesophase Carbon Microbeads from Soft Bitumen and Coal Tar by Liquid Phase Carbonization Method [Volume 41, Issue 4, 2023, Pages 75-90]
-
Nasr Esfahani, A.R.
Synthesis of Mesophase Carbon Microbeads from Soft Bitumen and Coal Tar by Liquid Phase Carbonization Method [Volume 41, Issue 4, 2023, Pages 75-90]
-
Nosohi, A. H.
Synthesis of YVO4 Ceramic Doped with Europium using Combustion Synthesis Method as a Down-Shifting Material for Solar Cell Applications [Volume 41, Issue 3, 2022, Pages 41-49]
P
-
Poursamar, A.
Optimization of the Process Parameters of Antibacterial Bioactive Glass/Polycaprolactone Composite Scaffold Printed by 3D Method [Volume 41, Issue 4, 2023, Pages 1-25]
R
-
Raeissi, K.
Comparison of Superhydrophobicity, Anti-Corrosion, Anti-Icing, and Self-Cleaning Properties of Nickel and Cobalt Coatings Fabricated by one-Step Electrodeposition [Volume 41, Issue 3, 2022, Pages 13-29]
-
Rafiaei, S. M.
Synthesis of YVO4 Ceramic Doped with Europium using Combustion Synthesis Method as a Down-Shifting Material for Solar Cell Applications [Volume 41, Issue 3, 2022, Pages 41-49]
-
Rafienia, M.
Optimization of the Process Parameters of Antibacterial Bioactive Glass/Polycaprolactone Composite Scaffold Printed by 3D Method [Volume 41, Issue 4, 2023, Pages 1-25]
-
Rahimi, F.
CRP and TNF-α Detection using Porous Silicon Substrate Based on Reflectometric Interference Fourier Transform Spectroscopy [Volume 41, Issue 3, 2022, Pages 1-12]
-
Ramazani, M.
FABRICATION AND CHARACTERIZATION OF MICROSTRUCTURE AND MECHANICAL PROPERTIES OF NANOCOMPOSITES BASED ON NICRALY ALLOY REINFORCED WITH SI3N4 PARTICLES BY SPARK PLASMA SINTERING METHOD [Volume 41, Issue 1, 2022, Pages 37-58]
-
Ramazani Saadatabadi, A.
EVALUATION OF ANTIBACTERIAL PROPERTIES OF POLYLACTIC ACID-POLYCAPROLACTONE-CONTAINING HYDROXYAPATITE AND ZINC OXIDE NANOPARTICLES IN HARD TISSUE ABSORBABLE SCAFFOLDS [Volume 41, Issue 1, 2022, Pages 1-17]
-
Rezayan, A.H.
CRP and TNF-α Detection using Porous Silicon Substrate Based on Reflectometric Interference Fourier Transform Spectroscopy [Volume 41, Issue 3, 2022, Pages 1-12]
-
Rezvani, M. H.
INVESTIGATION OF THE ADDITION OF METHIONINE ON THE CORROSION OF 316L STAINLESS STEEL FABRICATED BY SLM METHOD IN SULFURIC ACID MEDIA [Volume 41, Issue 1, 2022, Pages 19-35]
S
-
Saeidpour, F.
Effect of Pulse Electroplating Parameters on the Deposition of Reinforcing Particles in Ni-W/CeO2 Composite Coating [Volume 41, Issue 3, 2022, Pages 63-77]
-
Saeri, M. R.
CHARACTERIZATION OF CHITOSAN AND POLYETHYLENE GLYCOL BIOPOLYMERS COATINGS ON MAGNETIC SPINEL FeFe2O4 NANOPARTICLES [Volume 41, Issue 1, 2022, Pages 81-95]
-
Salehikahrizsangi, P.
Comparison of Superhydrophobicity, Anti-Corrosion, Anti-Icing, and Self-Cleaning Properties of Nickel and Cobalt Coatings Fabricated by one-Step Electrodeposition [Volume 41, Issue 3, 2022, Pages 13-29]
-
Sardarian, M.
Fabrication of Spark Plasma Sintered Spark Plasma Sintered Transparent Alumina Using Magnesium Oxide and Lanthanum Oxide as Sintering-Assisted [Volume 41, Issue 3, 2022, Pages 31-40]
-
Sedighi, M.
CRP and TNF-α Detection using Porous Silicon Substrate Based on Reflectometric Interference Fourier Transform Spectroscopy [Volume 41, Issue 3, 2022, Pages 1-12]
-
Shahriari, M.
Fabrication of Spark Plasma Sintered Spark Plasma Sintered Transparent Alumina Using Magnesium Oxide and Lanthanum Oxide as Sintering-Assisted [Volume 41, Issue 3, 2022, Pages 31-40]
-
Shamanian, M.
INVESTIGATION OF THE EFFECT OF PULSED CURRENT GAS TUNGSTEN ARC WELDING ON AUSTENITIC AISI 321 STAINLESS STEEL BONDING PROPERTIES [Volume 41, Issue 1, 2022, Pages 59-79]
-
Sharifi, I.
CHARACTERIZATION OF CHITOSAN AND POLYETHYLENE GLYCOL BIOPOLYMERS COATINGS ON MAGNETIC SPINEL FeFe2O4 NANOPARTICLES [Volume 41, Issue 1, 2022, Pages 81-95]
-
Sharifian, B.
Synthesis of Al7075/TiB2-Al2O3 In-Situ Hybrid Composite by Stir Casting Method [Volume 41, Issue 2, 2022, Pages 51-65]
-
Shokrollahi, H.
A Review of Resistive Gas Sensors Based on Semiconducting Metal Oxides [Volume 41, Issue 2, 2022, Pages 67-109]
-
Sobhani, M.
Synthesis of Mesophase Carbon Microbeads from Soft Bitumen and Coal Tar by Liquid Phase Carbonization Method [Volume 41, Issue 4, 2023, Pages 75-90]
T
-
Talebniya, Sh.
CHARACTERIZATION OF CHITOSAN AND POLYETHYLENE GLYCOL BIOPOLYMERS COATINGS ON MAGNETIC SPINEL FeFe2O4 NANOPARTICLES [Volume 41, Issue 1, 2022, Pages 81-95]
-
Tavoosi, M.
Investigating the Effect of B, Sb, and Ge Elements on the Structural and Magnetic Properties of Rare Earth Elements -Free Permanent MnBi Magnets [Volume 41, Issue 2, 2022, Pages 111-125]
-
Tavoosi, M.
The Effect of Quenching and Partitioning (Q&P) Process on the Structural and Mechanical Properties of AISI 4130 Steel [Volume 41, Issue 3, 2022, Pages 51-61]
Y
-
Yeganeh, M.
INVESTIGATION OF THE ADDITION OF METHIONINE ON THE CORROSION OF 316L STAINLESS STEEL FABRICATED BY SLM METHOD IN SULFURIC ACID MEDIA [Volume 41, Issue 1, 2022, Pages 19-35]
Z
-
Zamani, Kh.
FABRICATION AND CHARACTERIZATION OF MICROSTRUCTURE AND MECHANICAL PROPERTIES OF NANOCOMPOSITES BASED ON NICRALY ALLOY REINFORCED WITH SI3N4 PARTICLES BY SPARK PLASMA SINTERING METHOD [Volume 41, Issue 1, 2022, Pages 37-58]
-
Zarei, R.
FABRICATION AND CHARACTERIZATION OF MICROSTRUCTURE AND MECHANICAL PROPERTIES OF NANOCOMPOSITES BASED ON NICRALY ALLOY REINFORCED WITH SI3N4 PARTICLES BY SPARK PLASMA SINTERING METHOD [Volume 41, Issue 1, 2022, Pages 37-58]
Your query does not match with any item